Shuttle Loader (2-racks / 3-racks)
YSU-00 / YSU-01
Located at the start of the SMT line, this unit uses a single shuttle with a puller to transfer PCBs from a magazine rack to the next machine. The rack part supports various rack sizes.
Standard Spec
| Item | Selectable Standard | |||||||
|---|---|---|---|---|---|---|---|---|
| Line Flow | Left to Right | Right to Left | ||||||
| Fixed Rail | Front | Rear | ||||||
| Pass Line (mm) | 950 ± 20 | 900 ± 20 | ||||||
| Voltage & Frequency | 220V±(10%) & 50 ~ 60Hz | 110V±(10%) & 50 ~ 60Hz | ||||||
| PCB Size |
|
|||||||
| Min.PCB (LXW) (mm) | 100 X 70 | |||||||
| Max.PCB (L X W) (mm) |
|
|||||||
| Item | Standard | |||||||
| PCB Top / Bottom Clearance | 30 / 25 | |||||||
| PCB Edge (mm) | 3 | |||||||
| PCB Loading Weight (kg) | 3 | |||||||
| Conveyor Belt | Flat edge belt | |||||||
| Conveyor Speed (mm/sec) * | 200 | |||||||
| PCB Thickness (mm) | 0.6 ~ 4.0 | |||||||
| PCB Color | Green | |||||||
| PCB In/Out Sensor | Single sensor | |||||||
| Magazine Size (L X W X H)mm |
|
|||||||
| Magazine Slot (ea) | 45 (First 5 slots from the bottom may not be used) | |||||||
| Magazine A size (mm) | 34 | |||||||
| Magazine B size (mm) | 34 | |||||||
| PCB Loading | Bottom to Upper (6 to 50) | |||||||
| Magazine Loading | Cylinder | |||||||
| Magazine Size | All size | |||||||
| Pitch | 1~6 (10 ~ 60mm) | |||||||
| Jam detect Function * | Pneumatic | |||||||
| Safety Items | Inside : Auto sliding door(non-contact safety door sensor) Outside : Manual sliding door(key type door sensor) |
|||||||
| Width Adjustment * | Auto | |||||||
| Interface | SMEMA Communication | |||||||
| Smema Cable | 3m / 1 ea | |||||||
| Alarm | Tower lamp (3 color) | |||||||
| Color * | SR RAL 7035 : NON ESD | |||||||
| Air Supply | 0.5Mpa (5bar) | |||||||
| Air Usage | 4.0 ℓ/min | |||||||
| Electricity Consumption | 720W | |||||||
Option Spec
| Item | CODE No. | Option |
|---|---|---|
| Conveyor Speed (mm/sec) * | O-10O-HW0-0104 | 1~200 / Analog / 1ea |
| Double Sensors | O-10O-HW0-0607 | - |
| PCB Top/Bottom Clearance(mm)* | O-10O-HW0-0900 | 60/60 |
| O-10O-HW0-0901 | 100/100 | |
| Jam Detect Function * | O-10O-HW1-0202 | - |
| Magazine Stopper Release | O-10O-HW1-0600 | - |
| Magazine Slot Recognition | O-10O-HW1-1000 | - |
| Width Synchronization | O-10O-SW0-0200 | via RS-485 |
| Line Control | O-20O-LC0-0100 | Hermes |
| O-20O-LC0-0200 | Smart kit (LAN communication PLC) | |
| Color * | O-40O-CO0-0100 | ESD powder coating(RAL 7035) |
Equipment Characteristics
-
- Touch screen (Operating panel)
- Magazine slots – 45ea
- Tower lamp
- Magazine size – One kind
- Auto width adjustment
- Pitch selection (1~6 pitch)
- SMEMA interface
- Jam detection (Pneumatic )
- Controlled by PLC
- Magazine capacity : 2-racks / 3-racks
Loader / Unloader Series
Magazine Loader
YML-00
Magazine Loader – All type(Bar…
YML-10
Magazine Loader - All type(Cha…
YML-30
Shuttle Loader (2-racks / 3-ra…
YSU-00 / YSU-01
Shuttle Loader – AGV (2-racks …
YSL-10 / YSL-11
Magazine Unloader
YMU-00
Magazine Unloader – All type(B…
YMU-10
Magazine Unloader – All type(C…
YMU-30
Shuttle Unloader (2-racks / 3-…
YSU-00 / YSU-01
Shuttle Unloader – AGV (2-rack…
YSU-10 / YSU-11
Magazine Buffer
YMB-00
YJ Link Co., Ltd | Address : 110, Secheon-ro 1-gil, Dasa-eup, Dalseong-gun, Daegu, South Korea | CEO : Soon-il Park | TEL : 053 592 1723 | FAX : 053 592 1724
Copyright ⓒ YJLINK All Rights Reserved.
