NG Conveyor
YNC-00
It is located after the
SPI/AOI, and allows the
operator to visually
inspect NG PCBs on the
line.
GOOD PCBs are
transferred to the next
equipment without any
interruption in the line
while the operator visually
inspects them.
Standard Spec
| Item | Selectable Standard | |
|---|---|---|
| Line Flow | Left to Right | Right to Left |
| Fixed Rail | Front | Rear |
| Pass Line (mm) | 950 ± 20 | 900 ± 20 |
| Voltage & Frequency | 220V±(10%) & 50 ~ 60Hz | 110V±(10%) & 50 ~ 60Hz |
| PCB Size | M | XL |
| Min.PCB (L X W) (mm) | 70 X 50 | |
| Max.PCB (L X W) (mm) | 330 X 250 | 460 X 460 |
| Item | Standard | |
| SMT | POST-PROCESS | |
| PCB Top/Botom Clearance (mm) | 30 / 25 | 60 / 60 |
| PCB Edge (mm) | 3 | 5 |
| PCB Loading Weight (kg) | 3 | 8 |
| Conveyor Belt | Flat edge belt | Pin chain |
| Conveyor Speed (mm/sec) * | 200 | 100 |
| PCB Thickness (mm) | 0.6 ~ 4.0 | |
| PCB Color | Green | |
| PCB In/Out Sensor | Single sensor | |
| Mode | By pass / Inspection | |
| Length(mm)/Segment(ea)* | 500/1 | 600/1 |
| Programmatically, it is standard to use 1 segment. | ||
| Completion Switch | Button Type | |
| Width Adjustment * | Manual | |
| Interface | SMEMA Communication | |
| Smema Cable | 3m / 1 ea | |
| Alarm | Tower lamp (3 color) | |
| Color * | SR RAL 7035 : NON ESD | |
| Air Supply | 0.5Mpa(5bar) | |
| Air Usage | 5.30 ℓ/min | |
| Electricity Consumption | 120W | |
Option Spec
| Item | CODE No. | Option | |
|---|---|---|---|
| Conveyor Speed (mm/sec) * |
SMT | O-10O-HW0-0104 | 1~200 / Analog / 2ea |
| POST-PROCESS | 1~100 / Analog / 2ea | ||
| Width Adjustment * | O-10O-HW0-0205 | Auto / 1ea | |
| Gas Spring Cover | O-10O-HW0-0501 | - | |
| Double Sensors | O-10O-HW0-0607 | - | |
| PCB Top/Bottom Clearance (mm) * | O-10O-HW0-0900 | 60 / 60 | |
| O-10O-HW0-0901 | 100 / 100 | ||
| Multi-speed Controller | O-10O-HW3-0400 | - | |
| Width Synchronization | O-10O-SW0-0200 | via RS-485 | |
| Line Control | O-20O-LC0-0100 | Hermes | |
| O-20O-LC0-0200 | Smart kit (LAN communication PLC) | ||
| Color * | O-40O-CO0-0100 | ESD powder coating(RAL 7035) | |
Equipment Characteristics
-
- Touch Screen Contro
- PLC Control
- LED Tower Lamp
- Length/Segment – 500/1 or 600/1
- Manual Width Adjustment
- Two-tiered Structure for Inspections
- Completion Switch - Button type
- SMEMA Interface
Link / Work Series
Connection Conveyor
YCC-00 / YCC-01
Connection Conveyor – Cooling
YCC-20 / YCC-21
Connection Conveyor – Barcode …
YCC-40 / YCC-41
Connection Conveyor – Barcode …
YCC-50 / YCC-51
Work Conveyor – Inspection
YWC-00 / YWC-01 / YWC-02
Work Conveyor – Work
YWC-20 / YWC-21 / YWC-22
NG Conveyor
YNC-00
Connection Conveyor – Sky Line
YCC-60 / YCC-62
Connection Conveyor – Pallet R…
YCC-70 / YCC-72
YJ Link Co., Ltd | Address : 110, Secheon-ro 1-gil, Dasa-eup, Dalseong-gun, Daegu, South Korea | CEO : Soon-il Park | TEL : 053 592 1723 | FAX : 053 592 1724
Copyright ⓒ YJLINK All Rights Reserved.
